Difficulty

Moderate

Steps

13

Time Required

                          15 - 25 minutes

Sections

3

  • Motherboard
  • 9 steps
  • Projector Lens
  • 3 steps
  • Exhaust Fan
  • 1 step

Flags

1

Confusing Text

Some of this guide’s text is confusing, duplicated, or off-topic. Clarify it by editing!

  • BackEpson PowerLite 822 Plus

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Motherboard
  • Flip the projector over.
  • Remove all 8 screws on the bottom of the projector.

Flip the projector over.

Remove all 8 screws on the bottom of the projector.

1024

Step 2

  • Now, flip the projector back over and pry the top of it open revealing the inside of the projector.

Now, flip the projector back over and pry the top of it open revealing the inside of the projector.

Step 3

  • Use the spudger to disconnect it from the motherboard.

Use the spudger to disconnect it from the motherboard.

Step 4

  • Using your finger gently move back and forth the JST cable that connects the top to the motherboard.
  • Now completely take off the top of the projector.

Using your finger gently move back and forth the JST cable that connects the top to the motherboard.

Now completely take off the top of the projector.

Step 5

  • Remove the 3 screws that secure the motherboard in place.

Remove the 3 screws that secure the motherboard in place.

Step 6

  • Gently move back and forth the 11 JST connectors until they come out.

Gently move back and forth the 11 JST connectors until they come out.

Step 7

  • With the spudger lift the red plastic tabs from their connectors.

With the spudger lift the red plastic tabs from their connectors.

Step 8

  • Lift the motherboard and disconnect the JST connector underneath.

Lift the motherboard and disconnect the JST connector underneath.

Step 9

  • Now, the motherboard is completely removed from the projector and you are ready to replace it.

Now, the motherboard is completely removed from the projector and you are ready to replace it.

Step 10

              Projector Lens
  • Unscrew the four 6mm screws that hold together the fan bracket.

Unscrew the four 6mm screws that hold together the fan bracket.

Step 11

  • Unscrew the four 6mm screws that secure the projector.

Unscrew the four 6mm screws that secure the projector.

Step 12

  • Pull out the loose projector.

Pull out the loose projector.

Step 13

              Exhaust Fan
  • Gently lift the fan bracket up and remove it and it is ready to be replaced.

Gently lift the fan bracket up and remove it and it is ready to be replaced.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 


                    Emma Richey

Member since: 03/21/2022

665 Reputation

                                      5 Guides authored                  



                       Badges:
                       5







                                                        +2 more badges

Team

                       University of Alabama, Team 1-3, Bedsole Spring 2022                        

                                                  Member of University of Alabama, Team 1-3, Bedsole Spring 2022 



                    UA-BEDSOLE-S22S1G3                     


                                            4 Members                     


                                            5 Guides authored