Difficulty
Easy
Steps
3
Time Required
5 minutes
Sections
1
- Lamp
- 3 steps
Flags
0
BackEpson PowerLite 77c
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
There is mercury in the device’s lamp; therefore, there are state and local regulations regarding disposal and recycling. Do not discard in the trashcan.
Before removing the lamp, be sure power down and unplug the device; allow it to fully cool before beginning.
What you need
Step 1
Lamp
- Use a Phillips #0 screwdriver to remove the one 5.0 mm screw from the lamp cover on the back of the device.
Use a Phillips #0 screwdriver to remove the one 5.0 mm screw from the lamp cover on the back of the device.
1024
Step 2
- Slide the cover toward you, then lift it to remove it.
Slide the cover toward you, then lift it to remove it.
Step 3
- Loosen the two 5.0 mm captive screws with a Phillips #0 screwdriver.
- Captive screws cannot be fully removed. Simply loosen the captive screws until the lamp housing releases, but do not attempt to remove them.
- Pinch the two release triggers to unlatch the lamp housing, and lift upward to remove it.
Loosen the two 5.0 mm captive screws with a Phillips #0 screwdriver.
Captive screws cannot be fully removed. Simply loosen the captive screws until the lamp housing releases, but do not attempt to remove them.
Pinch the two release triggers to unlatch the lamp housing, and lift upward to remove it.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 1 other contributor
Gretchen Thomas
Member since: 02/08/2022
211 Reputation
2 Guides authored
Badges:
3
Team
Western Carolina University, Team 1-6, Virtue Spring 2022
Member of Western Carolina University, Team 1-6, Virtue Spring 2022
WCU-VIRTUE-S22S1G6
4 Members
5 Guides authored
