Epson Powerlite 77C Front Remote Sensor Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          15 - 25 minutes

Sections

Top Panel
2 steps
Front Remote Sensor
2 steps

Flags

BackEpson PowerLite 77c
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Top Panel

Use a Phillips #0 screwdriver to remove the seven 5.0 mm screws on the base panel.
Pick up the projector with both hands, sandwiching the top and bottom of the projector together, and place it right-side-up, with the ports facing you.
Lift the top panel up.
Two connectors are holding the top panel to the motherboard; be careful not to damage them as you lift the top panel.

Use a Phillips #0 screwdriver to remove the seven 5.0 mm screws on the base panel.

Pick up the projector with both hands, sandwiching the top and bottom of the projector together, and place it right-side-up, with the ports facing you.

Lift the top panel up.

Two connectors are holding the top panel to the motherboard; be careful not to damage them as you lift the top panel.

1024

Step 2

Flip the locking bar of the ZIF connector vertically, then delicately remove the ribbon cable.
Grip the cable connector as close as possible to the plug, then pull it straight up until it releases from the motherboard.
Remove the top panel.

Flip the locking bar of the ZIF connector vertically, then delicately remove the ribbon cable.

Grip the cable connector as close as possible to the plug, then pull it straight up until it releases from the motherboard.

Remove the top panel.

Step 3

              Front Remote Sensor

Grip the front remote sensor’s white plug and gently pull directly upwards until the plug releases.

Grip the front remote sensor’s white plug and gently pull directly upwards until the plug releases.

Step 4

Lift the remote sensor up and out of the projector.

Lift the remote sensor up and out of the projector.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 1 other contributor

                    Julia Costantino

Member since: 02/08/2022

234 Reputation

                                      2 Guides authored                  



                       Badges:
                       4







                                                        +1 more badge

Team

                       Western Carolina University, Team 1-6, Virtue Spring 2022                        

                                                  Member of Western Carolina University, Team 1-6, Virtue Spring 2022 



                    WCU-VIRTUE-S22S1G6                     


                                            4 Members                     


                                            5 Guides authored

Introduction#

What you need#

#

#

#

#

#

#

Team#

#

Introduction

What you need

Team