Difficulty
Easy
Steps
3
Time Required
10 minutes
Sections
1
- Top Cover
- 3 steps
Flags
Better Introduction
Improve this guide by completing or revising its introduction.
BackEpson Powerlite 410W
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Top Cover
- Press the power button located on top of the projector.
- Remember to let the projector cool off completely after turning off the power before beginning the repair.
Press the power button located on top of the projector.
Remember to let the projector cool off completely after turning off the power before beginning the repair.
1024
Step 2
- Remove eight screws from the bottom of the device using a Phillips #00 screwdriver.
Remove eight screws from the bottom of the device using a Phillips #00 screwdriver.
Step 3
- Turn the projector so the power button is on top.
- Gently pull up the cover until it pops off.
- Do not pull too far; a ribbon cable still connects the top cover to the motherboard.
- Disconnect the ribbon cable that attaches the cover to the motherboard.
- Remove the cover and place to the side.
Turn the projector so the power button is on top.
Gently pull up the cover until it pops off.
Do not pull too far; a ribbon cable still connects the top cover to the motherboard.
Disconnect the ribbon cable that attaches the cover to the motherboard.
Remove the cover and place to the side.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
Kristen Gismondi
Member since: 11/12/2014
69,397 Reputation
176 Guides authored
Badges:
44
+41 more badges
Team
iFixit
Member of iFixit
Community
141 Members
15,772 Guides authored