Difficulty
Moderate
Steps
1
Time Required
1 minute
Sections
- Air Filter
- 1 step
Flags
0
BackEpson Powerlite 410W
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
If you wish to clean your air filter before replacing it with a new one due to a clogged vent, refer to the troubleshooting page as there are a few different ways to do this. To remove large debris, lightly tap both sides of the air filter. To clean smaller debris, take a brush and lightly brush the filter to remove any dust and debris; a vacuum can be effective at removing dust as well. A can of compressed air will also quickly remove dust, but make sure to hold the can upright.
Step 1
Air Filter
- When looking at the lens-side of the projector, the air filter will be a thin black line on the far right.
- Gently pull the air filter perpendicular to the projector body.
When looking at the lens-side of the projector, the air filter will be a thin black line on the far right.
Gently pull the air filter perpendicular to the projector body.
1024
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
Randy Krygowski
Member since: 01/11/2022
172 Reputation
2 Guides authored
Badges:
4
+1 more badge
Team
Illinois Wesleyan University, Team 1-4, Bullock Spring 2022
Member of Illinois Wesleyan University, Team 1-4, Bullock Spring 2022
IWU-BULLOCK-S22S1G4
3 Members
5 Guides authored
