Difficulty

Easy

Steps

3

Time Required

                          5 minutes

Sections

1

  • Epson Perfection V33 Main Housing Removal
  • 3 steps

Flags

In Progress

This guide is a work in progress. Reload periodically to see the latest changes!

Needs More Images

A few more images would make this guide’s procedures crystal clear.

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackEpson Perfection V33

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Open the lid of the scanning bed
  • Open up the lid to the flatbed scanner.
  • It can help with the next step if you lift it so it bends out flat to the other side.

Open up the lid to the flatbed scanner.

It can help with the next step if you lift it so it bends out flat to the other side.

1024

Step 2

              Unscrew the hinge side of the top shell
  • On each side of the open hinge there are two large Phillips screws on either side.
  • Use a Phillips screwdriver to unscrew them and lift them out with tweezers.
  • Be careful and avoid dropping the screws on the scanning glass so you don’t scratch it.

On each side of the open hinge there are two large Phillips screws on either side.

Use a Phillips screwdriver to unscrew them and lift them out with tweezers.

Be careful and avoid dropping the screws on the scanning glass so you don’t scratch it.

Step 3

              Slide the top shell off
  • Gently lift the top casing of the scanner up from the side where you unscrewed the area around the lid hinge, at the corner opposite to where the buttons are located.
  • While holding it up at an angle like that, slide the casing towards the opposite side of the hinge.
  • The top casing can now be gently lifted off.

Gently lift the top casing of the scanner up from the side where you unscrewed the area around the lid hinge, at the corner opposite to where the buttons are located.

While holding it up at an angle like that, slide the casing towards the opposite side of the hinge.

The top casing can now be gently lifted off.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 


                    Dzuk

Member since: 07/12/2021

1,221 Reputation

                                      10 Guides authored                  



                       Badges:
                       11







                                                        +8 more badges