Difficulty
Easy
Steps
3
Time Required
5 minutes
Sections
1
- Lamp
- 3 steps
Flags
Needs More Images
A few more images would make this guide’s procedures crystal clear.
Better Introduction
Improve this guide by completing or revising its introduction.
Missing Details
Some of this guide’s details are missing. Help users by adding tools, difficulty, or time.
BackEpson EX90
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
Step 1
Lamp
- Turn off the projector and unplug the power cable.
- Allow the projector to cool down for at least one hour (or until the lamp is cool).
Turn off the projector and unplug the power cable.
Allow the projector to cool down for at least one hour (or until the lamp is cool).
1024
Step 2
- Loosen the screw holding the lamp cover on top of the projector.
- Slide the cover out of the projector.
Loosen the screw holding the lamp cover on top of the projector.
Slide the cover out of the projector.
Step 3
- Loosen the two captive screws holding the lamp in place.
- Use your hands to pull the lamp straight up and out of the projector.
Loosen the two captive screws holding the lamp in place.
Use your hands to pull the lamp straight up and out of the projector.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
Antonio Morais
Member since: 04/01/2022
97 Reputation
1 Guide authored
Badges:
3
Team
UMass Dartmouth, Team 2-3, Mellen Spring 2022
Member of UMass Dartmouth, Team 2-3, Mellen Spring 2022
UMASSD-MELLEN-S22S2G3
4 Members
3 Guides authored