Difficulty

Moderate

Steps

4

Time Required

                          10 minutes

Sections

1

  • Cooling Fan
  • 4 steps

Flags

3

Needs More Images

A few more images would make this guide’s procedures crystal clear.

Better Introduction

Improve this guide by completing or revising its introduction.

Missing Details

Some of this guide’s details are missing. Help users by adding tools, difficulty, or time.

  • BackEpson EX90

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

Step 1

              Cooling Fan
  • Place the projector so that the bottom is facing upwards
  • Remove eight screws from the bottom of the device.
  • Open the cover.
  • Be careful when opening the cover; a ribbon cable is still connecting the cover to the motherboard.

Place the projector so that the bottom is facing upwards

Remove eight screws from the bottom of the device.

Open the cover.

Be careful when opening the cover; a ribbon cable is still connecting the cover to the motherboard.

1024

Step 2

  • Carefully remove the 2 separate wire connections from the fan to the corner of the motherboard. These are right next to each other.
  • Make sure to remember or document which wires connect to which port.

Carefully remove the 2 separate wire connections from the fan to the corner of the motherboard. These are right next to each other.

Make sure to remember or document which wires connect to which port.

Step 3

  • Remove the three screws holding the fan’s frame in place.

Remove the three screws holding the fan’s frame in place.

Step 4

  • Remove the fan assembly from the projector.
  • Remove the two screws in diagonal corners of the fan.
  • Remove the fan from its housing.
  • If the fan is still in good condition, use a paper towel or cloth and clean out all the dust on your fan before reassembling.

Remove the fan assembly from the projector.

Remove the two screws in diagonal corners of the fan.

Remove the fan from its housing.

If the fan is still in good condition, use a paper towel or cloth and clean out all the dust on your fan before reassembling.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 


                    Lucas Ketchie

Member since: 04/01/2022

160 Reputation

                                      1 Guide authored                  



                       Badges:
                       3

Team

                       UMass Dartmouth, Team 2-3, Mellen Spring 2022                        

                                                  Member of UMass Dartmouth, Team 2-3, Mellen Spring 2022 



                    UMASSD-MELLEN-S22S2G3                     


                                            4 Members                     


                                            3 Guides authored