Difficulty
Very easy
Steps
2
Time Required
1 - 2 minutes
Sections
1
- Back Cover
- 2 steps
Flags
0
BackEnvizen V100M
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
WARNING: Use caution when removing the back cover the speakers are attached to both the back covers and the motherboard assembly
What you need
Step 1
Back Cover
- Remove the two screws on the side of the tablet that hold the back cover in place using the ifixit PH00 screwdriver.
- The two screws for the back cover are: 1.5mm diameter x 3.5mm long
Remove the two screws on the side of the tablet that hold the back cover in place using the ifixit PH00 screwdriver.
The two screws for the back cover are: 1.5mm diameter x 3.5mm long
1024
Step 2
- Pry along the edge of the device to separate the back cover from the device.
- The speakers are attached to the back cover and motherboard assembly so remove carefully.
Pry along the edge of the device to separate the back cover from the device.
The speakers are attached to the back cover and motherboard assembly so remove carefully.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 4 other contributors
nbach
Member since: 03/23/2015
663 Reputation
6 Guides authored
Badges:
11
+8 more badges
Team
UMass Dartmouth, Team 3-2, Duarte Spring 2015
Member of UMass Dartmouth, Team 3-2, Duarte Spring 2015
UMASSD-DUARTE-S15S3G2
4 Members
12 Guides authored
