Difficulty
Moderate
Steps
2
Time Required
Suggest a time??
Sections
1
- Engine Brake Disassembly
- 2 steps
Flags
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
BackBriggs and Stratton 5.5HP 123k02-0239-E1
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Remove spring and brackets
- Remove the return spring by using needle nose pliers, a screwdriver, or other device. I removed the spring by the end of the front bracket (away from the mower handle). Lift up and away from the bracket, and the spring should come out.
- Beware! The spring is very strong and injury could result if proper care is not exercised.
- Remove the two bolts using a 7/16 socket.
Remove the return spring by using needle nose pliers, a screwdriver, or other device. I removed the spring by the end of the front bracket (away from the mower handle). Lift up and away from the bracket, and the spring should come out.
Beware! The spring is very strong and injury could result if proper care is not exercised.
Remove the two bolts using a 7/16 socket.
1024
Step 2
Remove alternator wire
- Push the metal tab closest to the black wire down
- While pushing the tab down, pull the black wire out of the clip.
- Disassembly is complete!
Push the metal tab closest to the black wire down
While pushing the tab down, pull the black wire out of the clip.
Disassembly is complete!
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 1 other contributor
Jacob Micallef
Member since: 03/06/2017
993 Reputation
7 Guides authored
Badges:
17
+14 more badges