Difficulty
Moderate
Steps
4
Time Required
Suggest a time??
Sections
1
- Battery
- 4 steps
Flags
3
Bullets!
Better coordination with markups and the color/type of bullets will help make this guide more clear!
Confusing Text
Some of this guide’s text is confusing, duplicated, or off-topic. Clarify it by editing!
Better Introduction
Improve this guide by completing or revising its introduction.
BackEmatic FTABMP2
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Use a spudger to pry open the case of your device to reveal the inside.
Use a spudger to pry open the case of your device to reveal the inside.
1024
Step 2
- Disconnect the LCD cable from the motherboard by pressing together the two sides of the clamp to separate the device into two.
Disconnect the LCD cable from the motherboard by pressing together the two sides of the clamp to separate the device into two.
Step 3
- Remove the screws holding down the motherboard. Remove the plastic power and volume buttons. remove the two side grips of the device. You can now remove the motherboard, speaker, and battery as one from the device.
Remove the screws holding down the motherboard. Remove the plastic power and volume buttons. remove the two side grips of the device. You can now remove the motherboard, speaker, and battery as one from the device.
Step 4
- Unsolder the gray, black, and red wires from the motherboard to release the battery.
Unsolder the gray, black, and red wires from the motherboard to release the battery.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
Timothy
Member since: 01/21/2015
505 Reputation
5 Guides authored
Badges:
6
+3 more badges
Team
USF Tampa, Team 9-2, Brown Winter 2015
Member of USF Tampa, Team 9-2, Brown Winter 2015
USFT-BROWN-W15S9G2
5 Members
10 Guides authored