Ematic Genesis 2 Battery Replacement Repair Guide

Difficulty

Difficult

Steps

Time Required

                          15 minutes

Sections

Battery
4 steps

Flags

Incorrect Tools

Help make this guide better by using the correct tools in images and/or text.

BackEmatic Genesis 2
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Battery

With your fingers, carefully pry off the back plastic casing. Starting at the corners is usually the easiest.

With your fingers, carefully pry off the back plastic casing. Starting at the corners is usually the easiest.

1024

Step 2

Remove all four screws surrounding the battery with a Phillips Head Screwdriver.
Carefully remove the battery from the device using the Metal Spudger tool to gently separate the battery by wedging it between the device and the battery.

Remove all four screws surrounding the battery with a Phillips Head Screwdriver.

Carefully remove the battery from the device using the Metal Spudger tool to gently separate the battery by wedging it between the device and the battery.

Step 3

Carefully remove the solder that connects the battery wires to the device using the solder sucker tool and a soldering iron.
When using the soldering iron to heat the existing solder, do not damage the device or surrounding connections.
Once all solder is gone, remove the wires from the device to free the battery.

Carefully remove the solder that connects the battery wires to the device using the solder sucker tool and a soldering iron.

When using the soldering iron to heat the existing solder, do not damage the device or surrounding connections.

Once all solder is gone, remove the wires from the device to free the battery.

Step 4

Use the soldering iron to solder the wires from the new battery to the device.
The connections from the wires should go in order from left to right being white, black (negative), and red (positive), respectively.

Use the soldering iron to solder the wires from the new battery to the device.

The connections from the wires should go in order from left to right being white, black (negative), and red (positive), respectively.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 3 other contributors

                    Brandon Key

Member since: 08/26/2015

246 Reputation

                                      2 Guides authored                  



                       Badges:
                       13







                                                        +10 more badges

Team

                       Western Carolina University, Team 1-1, Virtue Fall 2015                        

                                                  Member of Western Carolina University, Team 1-1, Virtue Fall 2015 



                    WCU-VIRTUE-F15S1G1                     


                                            4 Members                     


                                            7 Guides authored

Incorrect Tools#

Introduction#

What you need#

#

#

#

#

#

#

Team#

#

Incorrect Tools

Introduction

What you need

Team