Ematic Funtab 3 Camera Replacement Repair Guide

Difficulty

Easy

Steps

Time Required

                          10 minutes

Sections

Back Panel
2 steps
Camera
3 steps

Flags

BackEmatic FunTab 3
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Back Panel

Turn off the device before starting
To prevent damage, open the device on the side without the buttons.
Insert the hooked end of the plastic opening tool in the gap between the screen and the back panel on the edge of the device.
Slide the plastic opening tool down the long side of the device.
Insert tool again and slide it down the long slide of the case a second time.

Turn off the device before starting

To prevent damage, open the device on the side without the buttons.

Insert the hooked end of the plastic opening tool in the gap between the screen and the back panel on the edge of the device.

Slide the plastic opening tool down the long side of the device.

Insert tool again and slide it down the long slide of the case a second time.

1024

Step 2

Pull the back panel away from the screen.

Pull the back panel away from the screen.

Step 3

              Camera

Remove the black tape to reveal the wire ribbon connector.

Remove the black tape to reveal the wire ribbon connector.

Step 4

Use the plastic opening tool to flip up the black retaining tab.

Use the plastic opening tool to flip up the black retaining tab.

Step 5

Pull out the wire ribbon connected to the camera.
The camera is held in place by glue, so extra force may be required.
Remove the camera from the device.
Close the black ribbon retaining tabs once ribbons are inserted during reassembly.

Pull out the wire ribbon connected to the camera.

The camera is held in place by glue, so extra force may be required.

Remove the camera from the device.

Close the black ribbon retaining tabs once ribbons are inserted during reassembly.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors

                    Amanda Davis

Member since: 07/11/2018

581 Reputation

                                      5 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges

Team

                       UW Tacoma, Team S1-G5, Cardinal Summer 2018                        

                                                  Member of UW Tacoma, Team S1-G5, Cardinal Summer 2018 



                    UWT-CARDINAL-SU18S1G5                     


                                            4 Members                     


                                            12 Guides authored

Introduction#

What you need#

Team#

Introduction

What you need

Team