Ematic Funtab 2 Battery Replacement Repair Guide

Difficulty

Moderate

Steps

7

Time Required

                          1 hour            

Sections

1

• Battery
• 7 steps

Flags

0

• BackEmatic FunTab2

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Battery               

• Pry open the Ematic FunTab 2 using the plastic opening tool.

Pry open the Ematic FunTab 2 using the plastic opening tool.

1024

Step 2

• Remove tape from the LCD connector.

Remove tape from the LCD connector.

Step 3

• Flip up the retaining tab (the black bar on the connector), then pull LCD connector with tweezers. Be careful not to damage the LCD connector.

Flip up the retaining tab (the black bar on the connector), then pull LCD connector with tweezers. Be careful not to damage the LCD connector.

Step 4

• Now remove battery by putting the spudger between the battery and the LCD display and prying apart.
• Be careful when prying the battery from the display. Wiggle the spudger if necessary.

Now remove battery by putting the spudger between the battery and the LCD display and prying apart.

Be careful when prying the battery from the display. Wiggle the spudger if necessary.

Step 5

• Remove tape from the yellow, red, and black wires connecting the battery to the LCD.

Remove tape from the yellow, red, and black wires connecting the battery to the LCD.

Step 6

• Disconnect the yellow, red, and black wires from the motherboard.
• You will need to solder these wires back after completing the battery replacement. Here is a link on how to solder How To Solder and Desolder Connections.

Disconnect the yellow, red, and black wires from the motherboard.

You will need to solder these wires back after completing the battery replacement. Here is a link on how to solder How To Solder and Desolder Connections.

Step 7

• Now remove battery. The battery should still be pried from the LCD display, if not pry it again.

Now remove battery. The battery should still be pried from the LCD display, if not pry it again.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.                                             

Author

                                      with 4 other contributors 

                    Eric Jesse                     

Member since: 03/24/2015

282 Reputation

                                      1 Guide authored                  



                       Badges:
                       10







                                                        +7 more badges                           

Team

                       University of Alabama, Team 1-1, Naidoo Spring 2015                        

                                                  Member of University of Alabama, Team 1-1, Naidoo Spring 2015 



                    UA-NAIDOO-S15S1G1                     


                                            4 Members                     


                                            4 Guides authored