Ematic Eglide 4 Side Button Array Replacement Repair Guide

Difficulty

Moderate

Steps

6

Time Required

                          5 minutes            

Sections

2

• Rear Panel
• 3 steps
• Side Button Array
• 3 steps

Flags

0

• BackEmatic Eglide 4

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Rear Panel               

• Remove the 4.6mm Phillips #00 screw at the base of the device.

Remove the 4.6mm Phillips #00 screw at the base of the device.

1024

Step 2

• Slide the rear panel away from the base parallel to the screen.

Slide the rear panel away from the base parallel to the screen.

Step 3

• Carefully remove the speakers from the rear panel.
• Pull the speakers off of the rear panel.

Carefully remove the speakers from the rear panel.

Pull the speakers off of the rear panel.

Step 4

              Side Button Array               

• Remove the 3 Phillips #00 4.5 mm screws from the side button array.

Remove the 3 Phillips #00 4.5 mm screws from the side button array.

Step 5

• Slide the grey ribbon wire connector clip away from the ribbon wire port on the motherboard using the pointed tip of a spudger. This process will unclip the wire from the motherboard to release connection.
• You do not need to fully disconnect the ribbon wire clip from the ribbon wire port: the clip will stay attached in a loose fit.
• Remove the ribbon wire from the ribbon wire port on the motherboard.

Slide the grey ribbon wire connector clip away from the ribbon wire port on the motherboard using the pointed tip of a spudger. This process will unclip the wire from the motherboard to release connection.

You do not need to fully disconnect the ribbon wire clip from the ribbon wire port: the clip will stay attached in a loose fit.

Remove the ribbon wire from the ribbon wire port on the motherboard.

Step 6

• Remove the side button array from the device.

Remove the side button array from the device.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 3 other contributors 

                    Bailey Hughes                     

Member since: 03/22/2015

617 Reputation

                                      6 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges                           

Team

                       Baylor, Team 5-8, Williams Spring 2015                        

                                                  Member of Baylor, Team 5-8, Williams Spring 2015 



                    BU-WILLIAMS-S15S5G8                     


                                            3 Members                     


                                            6 Guides authored