Difficulty

Moderate

Steps

9

Time Required

Suggest a time??

Sections

1

  • Battery to Electric Wheelchair
  • 9 steps

Flags

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

  • BackWheelchair

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

Step 1

              Battery to Electric Wheelchair
  • Locate the two batteries under the back of the wheelchair.
  • Pull the first battery pack to where you can reach the red battery connector.
  • Be careful, the batteries are heavy.

Locate the two batteries under the back of the wheelchair.

Pull the first battery pack to where you can reach the red battery connector.

Be careful, the batteries are heavy.

1024

Step 2

  • Disconnect the red battery connectors by pulling them apart.

Disconnect the red battery connectors by pulling them apart.

Step 3

  • Remove the first and second battery from the wheelchair.

Remove the first and second battery from the wheelchair.

Step 4

  • Disconnect the black battery connectors by pulling them apart.

Disconnect the black battery connectors by pulling them apart.

Step 5

  • One at a time, disconnect the clips holding each battery case closed.
  • Open each case to reveal the battery inside.

One at a time, disconnect the clips holding each battery case closed.

Open each case to reveal the battery inside.

Step 6

  • Remove the old battery from each case.
  • Put one new battery into each plastic case the old batteries were removed from.

Remove the old battery from each case.

Put one new battery into each plastic case the old batteries were removed from.

Step 7

  • Reattach the clips on each of the battery’s protective casings.

Reattach the clips on each of the battery’s protective casings.

Step 8

  • Place the first battery back into the holder under the wheelchair.
  • Make sure that it is pushed all the way to the front of the wheelchair.
  • Place the second battery back into the holder.

Place the first battery back into the holder under the wheelchair.

Make sure that it is pushed all the way to the front of the wheelchair.

Place the second battery back into the holder.

Step 9

  • Reconnect the black battery connectors.
  • Do not connect the red connectors until the black are connected.
  • Reconnect the red battery connectors.
  • Check that the chair turns on and is fully charged.

Reconnect the black battery connectors.

Do not connect the red connectors until the black are connected.

Reconnect the red battery connectors.

Check that the chair turns on and is fully charged.

Cancel: I did not complete this guide.

                                                                                      3 other people completed this guide.

Author

                                      with 3 other contributors 


                    Paige Efting

Member since: 01/19/2016

159 Reputation

                                      1 Guide authored                  



                       Badges:
                       5







                                                        +2 more badges

Team

                       Oakland University, Team 6-1, Walwema Winter 2016                        

                                                  Member of Oakland University, Team 6-1, Walwema Winter 2016 



                    OAK-WALWEMA-W16S6G1                     


                                            10 Members                     


                                            10 Guides authored

Justin Lubomirsky - Jan 9, 2019

Reply

I greatly enjoyed reading your article :) Please continue publishing helpful topics like this. Regards, from Scooters ‘N Chairs.