Electric Jet Fan Blower Blade Fan Replacement Repair Guide

Difficulty

Moderate

Steps

7

Time Required

                          15 - 30 minutes            

Sections

1

• fan blade
• 7 steps

Flags

2

In Progress

This guide is a work in progress. Reload periodically to see the latest changes!

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

• BackElectric Jet Fan Blower

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Tools Needed               

• Tools needed to fix your Ryobi Electronic Jet Fan Blower: ½” wrench or socket and a #16 5 point star screwdriver

Tools needed to fix your Ryobi Electronic Jet Fan Blower: ½” wrench or socket and a #16 5 point star screwdriver

1024

Step 2

              Disassembly               

• Locate the 7 screws along the handle and remove them with the #16 5 point star screwdriver
• Locate the 2 additional screws on the under-body and remove them

Locate the 7 screws along the handle and remove them with the #16 5 point star screwdriver

Locate the 2 additional screws on the under-body and remove them

Step 3

• Gently wedge apart the handle being careful not to damage the wiring inside.
• Carefully separate the two parts of the handle

Gently wedge apart the handle being careful not to damage the wiring inside.

Carefully separate the two parts of the handle

Step 4

• Remove the grey switch plate. Note how the wiring is laid out on your particular model as it may vary.
• Remove the 2 screws and spacer holding the plug in.

Remove the grey switch plate. Note how the wiring is laid out on your particular model as it may vary.

Remove the 2 screws and spacer holding the plug in.

Step 5

• Gently wedge the chute away from the main carriage. It may be on tight but should come apart with light pressure.

Gently wedge the chute away from the main carriage. It may be on tight but should come apart with light pressure.

Step 6

• Remove nut with a ½” wrench (or socket) clockwise while holding the fan blade still.
• The fan blade should easily slide off once the nut is removed. If you are looking to replace your fan blade, you are now able to slide one on.

Remove nut with a ½” wrench (or socket) clockwise while holding the fan blade still.

The fan blade should easily slide off once the nut is removed. If you are looking to replace your fan blade, you are now able to slide one on.

Step 7

• The fully disassembled Ryobi Electric Jet Fan Blower

The fully disassembled Ryobi Electric Jet Fan Blower

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 

                    Tiara Stigall                     

Member since: 12/13/2017

145 Reputation

                                      1 Guide authored                  



                       Badges:
                       4







                                                        +1 more badge                           

Team

                       Triple S, Inc                        

                                                  Member of Triple S, Inc 



                    Community                     


                                            3 Members                     


                                            1 Guide authored