Difficulty

Moderate

Steps

3

Time Required

                          10 - 20 minutes

Sections

1

  • Air Activated On/Off Switch
  • 3 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackElectric Eel Drain Cleaner RFK-3/4IC100 (2014)

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Step 1

              Air Activated On/Off Switch
  • Remove 4 Phillips head screws holding on the cover plate and gasket behind it.

Remove 4 Phillips head screws holding on the cover plate and gasket behind it.

1024

Step 2

  • Remove bottom 9/16 nut that holds the pneumatic tube on the switch.

Remove bottom 9/16 nut that holds the pneumatic tube on the switch.

Step 3

  • Thread the new switch into the pneumatic tube, careful threads are plastic.
  • Attach yellow wire to the top and the black wire to bottom of switch with disconnect.
  • Tighten 1/2 nut on the pneumatic tube until snug.

Thread the new switch into the pneumatic tube, careful threads are plastic.

Attach yellow wire to the top and the black wire to bottom of switch with disconnect.

Tighten 1/2 nut on the pneumatic tube until snug.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      3 other people completed this guide.

Author

                                      with 1 other contributor 


                    Trevor A

Member since: 09/16/2021

1,186 Reputation

                                      6 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges