Edwin The Duck Rubber Gasket Seal Replacement Repair Guide

Difficulty

Moderate

Steps

6

Time Required

                          5 - 10 minutes            

Sections

1

• Rubber Gasket Seal
• 6 steps

Flags

0

• BackEdwin the Duck

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Rubber Gasket Seal               

• Unscrew the four 9mm screws with aT8 bit
• Take the back plate off

Unscrew the four 9mm screws with aT8 bit

Take the back plate off

1024

Step 2

• Carefully take off the rubber skin.
• Be patient and don’t rush. You don’t want to rip or damage the rubber skin otherwise you will lose the waterproof cover.

Carefully take off the rubber skin.

Be patient and don’t rush. You don’t want to rip or damage the rubber skin otherwise you will lose the waterproof cover.

Step 3

• Using the J1 bit, unscrew all six 9 mm screws around the border.

Using the J1 bit, unscrew all six 9 mm screws around the border.

Step 4

• Use the plastic opening tool to open the inside of the duck.
• Be very careful when splitting the two halves apart. There are wires connecting to both sides. So open it very slowly.

Use the plastic opening tool to open the inside of the duck.

Be very careful when splitting the two halves apart. There are wires connecting to both sides. So open it very slowly.

Step 5

• Remove the rubber gasket

Remove the rubber gasket

Step 6

• Insert your new rubber gasket in and use the plastic opening tool to push the rubber gasket into it’s slot

Insert your new rubber gasket in and use the plastic opening tool to push the rubber gasket into it’s slot

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 

                    Nadia Dobrogorskaya                     

Member since: 10/18/2017

131 Reputation

                                      1 Guide authored                  



                       Badges:
                       5







                                                        +2 more badges                           

Team

                       UW Tacoma, Team S1-G4, Rose Fall 2017                        

                                                  Member of UW Tacoma, Team S1-G4, Rose Fall 2017 



                    UWT-ROSE-F17S1G4                     


                                            4 Members                     


                                            4 Guides authored