Difficulty
Moderate
Steps
3
Time Required
5 - 15 minutes
Sections
1
- Battery
- 3 steps
Flags
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
BackEcovacs DEEBOT DN622.11
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Here is the DEEBOT DN622.11 also know as a N79S.
- Turn it over to have the underside exposed
- Locate the two Phillips head screws that hold the battery cover in place
Here is the DEEBOT DN622.11 also know as a N79S.
Turn it over to have the underside exposed
Locate the two Phillips head screws that hold the battery cover in place
1024
Step 2
- Unscrews the two Phillips head screws
- Remove the battery cover
- Note position of the battery in the battery compartment
Unscrews the two Phillips head screws
Remove the battery cover
Note position of the battery in the battery compartment
Step 3
- Lift the battery out of the compartment
- Disconnect the battery connector by squeezing the tab on the female end of the connector. The battery can now be replaced.
Lift the battery out of the compartment
Disconnect the battery connector by squeezing the tab on the female end of the connector. The battery can now be replaced.
To reassemble your Deebot, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 1 other contributor
oldturkey03
Member since: 09/29/2010
722,419 Reputation
109 Guides authored
Badges:
53
+50 more badges
Team
Global Fixers
Member of Global Fixers
Community
22 Members
240 Guides authored
