Ecovacs Deebot D35 Motherboard Replacement Repair Guide

Difficulty

Moderate

Steps

9

Time Required

                          10 - 20 minutes            

Sections

1

• Motherboard
• 9 steps

Flags

Markup Mishap

This guide needs better markups. Help out by correcting or making some markup annotations.

• BackEcovacs DEEBOT D35

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Motherboard               

• Flip the D35 onto its back.

Flip the D35 onto its back.

1024

Step 2

• Remove the 9 screws with a PH2 Phillips screwdriver on the underside of the D35. The screws are:
• 7 x 14mm screws
• 2 x 10mm screws

Remove the 9 screws with a PH2 Phillips screwdriver on the underside of the D35. The screws are:

7 x 14mm screws

2 x 10mm screws

Step 3

• Use spudger or plastic opening tool to separate the Deebot backside

Use spudger or plastic opening tool to separate the Deebot backside

Step 4

• Carefully lift the back cover from the body of the Deebot

Carefully lift the back cover from the body of the Deebot

Step 5

• There are 5 cables that need to be carefully disconnected before completely disconnecting the back cover:
• The 5 cables two blue cables on the front left and right side (located next to the sensor). Represented by the red arrows.
• Multicolor ribbon in the front center. Represented by the blue arrow.
• Two (black and red) two prong adapter connected to the motherboard. Represented by the green arrow.

There are 5 cables that need to be carefully disconnected before completely disconnecting the back cover:

The 5 cables two blue cables on the front left and right side (located next to the sensor). Represented by the red arrows.

Multicolor ribbon in the front center. Represented by the blue arrow.

Two (black and red) two prong adapter connected to the motherboard. Represented by the green arrow.

Step 6

• Locate the 3 screws on the motherboard:
• 2 x 14mm screws
• 1 x 10mm screws

Locate the 3 screws on the motherboard:

2 x 14mm screws

1 x 10mm screws

Step 7

• Remove the screws from the motherboard with a PH2 Phillips Head Screwdriver. The screws are:
• 2 x 14mm screws
• 1 x 10mm screws

Remove the screws from the motherboard with a PH2 Phillips Head Screwdriver. The screws are:

Step 8

• Locate and disconnect 12 cables bundles connected on the motherboard

Locate and disconnect 12 cables bundles connected on the motherboard

Step 9

• Carefully disconnect the motherboard from the Deebot body.

Carefully disconnect the motherboard from the Deebot body.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.                                             

Author

                                      with 4 other contributors 

                    Kevin McKernan                     

Member since: 02/15/2017

107 Reputation

                                      1 Guide authored                  



                       Badges:
                       7







                                                        +4 more badges                           

Team

                       USF Tampa, Team 12-2, Eyestone Spring 2017                        

                                                  Member of USF Tampa, Team 12-2, Eyestone Spring 2017 



                    USFT-EYESTONE-S17S12G2                     


                                            4 Members                     


                                            4 Guides authored