Ecovacs Deebot 900 Motherboard Replacement Repair Guide

Difficulty

Very difficult

Steps

10

Time Required

                          5 - 15 minutes            

Sections

3

• Front Bumper
• 4 steps
• Bottom Case
• 2 steps
• Motherboard
• 4 steps

Flags

1

Better Introduction

Improve this guide by completing or revising its introduction.

• BackEcovacs Deebot 900

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Front Bumper               

• Using a Phillips #00 screwdriver, remove the eight screws on the bottom edge of the bumper. ​

Using a Phillips #00 screwdriver, remove the eight screws on the bottom edge of the bumper. ​

1024

Step 2

• Remove the black strip on the bottom of the bumper.

Remove the black strip on the bottom of the bumper.

Step 3

• Carefully lift up the bumper untill it pops out of place.​

Carefully lift up the bumper untill it pops out of place.​

Step 4

• Disconnect the two cables connecting the bumper to the body of the Deebot.
• Remove the front bumper from the device.

Disconnect the two cables connecting the bumper to the body of the Deebot.

Remove the front bumper from the device.

Step 5

              Bottom Case               

• Using a Phillips #00 screwdriver, take out the six screws around the perimeter of the bottom case.

Using a Phillips #00 screwdriver, take out the six screws around the perimeter of the bottom case.

Step 6

• Insert a Jimmy into the seam and work all the way around the robot.
• Disconnect the two cables and remove the bottom case from the device.

Insert a Jimmy into the seam and work all the way around the robot.

Disconnect the two cables and remove the bottom case from the device.

Step 7

              Motherboard               

• Using a Phillips #00 screwdriver, remove the two black screws holding the motherboard in place.​

Using a Phillips #00 screwdriver, remove the two black screws holding the motherboard in place.​

Step 8

• Carefully remove the ribbon cables connected to the top of motherboard.
• Keep track of where the cables connect to the motherboard.

Carefully remove the ribbon cables connected to the top of motherboard.

Keep track of where the cables connect to the motherboard.

Step 9

• Remove the last three ribbon cables on the underside of the motherboard.​

Remove the last three ribbon cables on the underside of the motherboard.​

Step 10

• Lift the motherboard out of the Deebot and remove it from the device.

Lift the motherboard out of the Deebot and remove it from the device.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      3 other people completed this guide.                                             

Author

                                      with 3 other contributors 

                    Gillian Blumer                     

Member since: 01/16/2020

492 Reputation

                                      3 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges                           

Team

                       Embry-Riddle Aeronautical University, Team S6-G1, Rauch Spring 2020                        

                                                  Member of Embry-Riddle Aeronautical University, Team S6-G1, Rauch Spring 2020 



                    ERAU-RAUCH-S20S6G1                     


                                            3 Members                     


                                            17 Guides authored                     

Curtis Tyler - Nov 12, 2022

Reply

Any suggestions on purchase options?