Difficulty

Difficult

Steps

6

Time Required

                          30 minutes

Sections

2

  • Frame
  • 4 steps
  • LED Display
  • 2 steps

Flags

3

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

Needs More Images

A few more images would make this guide’s procedures crystal clear.

Missed a Step

Oops! This guide is currently missing some important steps.

  • BackEco X Gear

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Frame
  • Disconnect any power source and/or turn off device.

Disconnect any power source and/or turn off device.

1024

Step 2

  • Remove the 15 rubber plugs from the cavities using needle nose pliers.

Remove the 15 rubber plugs from the cavities using needle nose pliers.

Step 3

  • Use a phillips head screwdriver to remove the fifteen 6.4mm screws.

Use a phillips head screwdriver to remove the fifteen 6.4mm screws.

Step 4

  • Carefully separate the two sections of the frame.
  • Wires still connect the two sections. Be cautious to avoid damaging the wires, terminals, and electronics.

Carefully separate the two sections of the frame.

Wires still connect the two sections. Be cautious to avoid damaging the wires, terminals, and electronics.

Step 5

              LED Display
  • Locate the terminals coming off of the backside of the LED lights. Cut the terminals to remove the light from the frame.

Locate the terminals coming off of the backside of the LED lights. Cut the terminals to remove the light from the frame.

Step 6

  • Insert the new LED light into the frame. Use the solder and soldering iron to reconnect the terminals to the new lights.

Insert the new LED light into the frame. Use the solder and soldering iron to reconnect the terminals to the new lights.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 


                    James Lipsett

Member since: 03/20/2017

601 Reputation

                                      6 Guides authored                  



                       Badges:
                       6







                                                        +3 more badges

Team

                       UMass Dartmouth, Team S9-G3, Martin Spring 2017                        

                                                  Member of UMass Dartmouth, Team S9-G3, Martin Spring 2017 



                    UMASSD-MARTIN-S17S9G3                     


                                            2 Members                     


                                            6 Guides authored