Difficulty

Moderate

Steps

9

Time Required

                          30 minutes

Sections

2

  • Frame
  • 4 steps
  • Battery
  • 5 steps

Flags

0

  • BackEco X Gear

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Frame
  • Disconnect any power source and/or turn off device.

Disconnect any power source and/or turn off device.

1024

Step 2

  • Remove the 15 rubber plugs from the cavities using needle nose pliers.

Remove the 15 rubber plugs from the cavities using needle nose pliers.

Step 3

  • Use a phillips head screwdriver to remove the fifteen 6.4mm screws.

Use a phillips head screwdriver to remove the fifteen 6.4mm screws.

Step 4

  • Carefully separate the two sections of the frame.
  • Wires still connect the two sections. Be cautious to avoid damaging the wires, terminals, and electronics.

Carefully separate the two sections of the frame.

Wires still connect the two sections. Be cautious to avoid damaging the wires, terminals, and electronics.

Step 5

              Battery
  • Disconnect the wiring to improve accessibility to the battery.

Disconnect the wiring to improve accessibility to the battery.

Step 6

  • Remove the two screws that hold that bracket, securing the battery in place.

Remove the two screws that hold that bracket, securing the battery in place.

Step 7

  • Disconnect the wires that hold the batteries down to the motherboard.

Disconnect the wires that hold the batteries down to the motherboard.

Step 8

  • Pry the battery from the frame using your hands or an opening pick.

Pry the battery from the frame using your hands or an opening pick.

Step 9

  • When removing and installing the battery, be cautious to not damage any of the surrounding electronics.

When removing and installing the battery, be cautious to not damage any of the surrounding electronics.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    James Lipsett

Member since: 03/20/2017

601 Reputation

                                      6 Guides authored                  



                       Badges:
                       6







                                                        +3 more badges

Team

                       UMass Dartmouth, Team S9-G3, Martin Spring 2017                        

                                                  Member of UMass Dartmouth, Team S9-G3, Martin Spring 2017 



                    UMASSD-MARTIN-S17S9G3                     


                                            2 Members                     


                                            6 Guides authored