Difficulty
Moderate
Steps
2
Time Required
5 - 10 minutes
Sections
1
- Outer Case
- 2 steps
Flags
0
BackEclipse 180G2-W
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Outer Case
- Remove the two screws on the bottom of the device with a Phillips head screwdriver.
- Use a spudger to remove the plastic plate from the bottom of the player.
Remove the two screws on the bottom of the device with a Phillips head screwdriver.
Use a spudger to remove the plastic plate from the bottom of the player.
1024
Step 2
Remove inner circuit from case shell
- Hold the device firmly between two fingers. Be sure you aren’t holding down the top of the device; the circuit board will slide out of the shell through that end.
- Use the spudger to push the USB port on the bottom of the device inward.
- The plastic LCD cover and the key pad will now be free; they were held in place by the tension between the case and the internal circuit board.
Hold the device firmly between two fingers. Be sure you aren’t holding down the top of the device; the circuit board will slide out of the shell through that end.
Use the spudger to push the USB port on the bottom of the device inward.
The plastic LCD cover and the key pad will now be free; they were held in place by the tension between the case and the internal circuit board.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
3 other people completed this guide.
Author
with 8 other contributors
Jesse Minor
Member since: 01/15/2015
662 Reputation
3 Guides authored
Badges:
17
+14 more badges
Team
USF Tampa, Team 1-4, Tanski Winter 2015
Member of USF Tampa, Team 1-4, Tanski Winter 2015
USFT-TANSKI-W15S1G4
4 Members
5 Guides authored
May 303 - Apr 7, 2019
Reply
What if there is no charge port or USB port there no longer?