Difficulty

Moderate

Steps

4

Time Required

                          10 minutes

Sections

1

  • Battery
  • 4 steps

Flags

3

Incorrect Tools

Help make this guide better by using the correct tools in images and/or text.

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

Slice and Dice

The steps in this guide should be split up and made into a series of prerequisite guides.

  • BackEclipse 180BL

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Remove the two screws located on the bottom of the device with a phillips head screw driver.
  • The two screws can be removed using the PH00 head from the iFixit repair toolkit.
  • Both screws are 1/8 inch in length.
  • The bottom cap will come off to reveal the inside main component.

Remove the two screws located on the bottom of the device with a phillips head screw driver.

The two screws can be removed using the PH00 head from the iFixit repair toolkit.

Both screws are 1/8 inch in length.

The bottom cap will come off to reveal the inside main component.

1024

Step 2

  • Remove the main inner component using Spudger, by pushing on the USB port. This will take some force.
  • Hold on the sides with your fingers, and push to release from the top.

Remove the main inner component using Spudger, by pushing on the USB port. This will take some force.

Hold on the sides with your fingers, and push to release from the top.

Step 3

  • The plastic LCD cover and the key pad will now be loose; they were held in place by the tension between the case and the internal main component.
  • Locate the large square pack with a black and red wire coming out of it, this is the battery.
  • Cut the red and black wires to remove the old battery.

The plastic LCD cover and the key pad will now be loose; they were held in place by the tension between the case and the internal main component.

Locate the large square pack with a black and red wire coming out of it, this is the battery.

Cut the red and black wires to remove the old battery.

Step 4

  • To Replace, connect the two new lines ( red and black) between the new battery and the device.
  • You have successfully replaced the battery!

To Replace, connect the two new lines ( red and black) between the new battery and the device.

You have successfully replaced the battery!

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      3 other people completed this guide.

Author

                                      with 2 other contributors 


                    Thomas Schwarz

Member since: 09/07/2015

499 Reputation

                                      3 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges

Team

                       USF Sarasota-Manatee, Team 1-2, Stewart Fall 2015                        

                                                  Member of USF Sarasota-Manatee, Team 1-2, Stewart Fall 2015 



                    USFSM-STEWART-F15S1G2                     


                                            5 Members                     


                                            16 Guides authored