Echo Line Trimmer model number SRM-225
Student-Contributed Wiki
An awesome team of students from our education program made this wiki.
No matter how hard you pull starter cord won’t budge or barely moves.
Starter recoil is just jammed or actually broken. Remove and check for problems. Replace if necessary
With the starter recoil removed. Remove spark plug and try to move engine manually. If it doesn’t move engine is seized. It might be able to be freed with 2 stroke oil in the cylinder. If not it will have to be rebuilt or scrapped altogether.
Equipment not performing as it should.
Before getting to excited make sure there is fuel with the proper oil and gas mixture. If it has been sitting for a long time the fuel can go bad and needs to be replaced.
Check fuel lines for cracks and leakage. Replace if damage is found.
Engine may not be getting enough air. Remove air filter and clean with warm soapy water and let dry or replace with a new air filter.
Engine may not be getting enough fuel. Remove and replace fuel filter.
Engine may not be getting enough spark. Remove spark plug to check for damage and heavy carbon build up at the electrode. Replace if any of these conditions exist.
The spark arrester is located in the muffler and if it becomes clogged it can cause poor performance. Remove and clean with wire brush or replace it with a new spark arrester.
On-off switch may be faulty causing the engine not to start. It can be tested with a multimeter or disconnect one of the wires from the switch. If the engine starts when it is disconnected the switch is bad and needs to be replaced.
The carburetor may not be functioning properly causing poor performance or failure to start. Jets and ports can become clogged over time. You can first try to clean the carburetor with a carburetor cleaner. If that doesn’t prove effective, rebuilding or replacing the entire carburetor will be necessary
