Echo Power Pruner 254 Cc Ppt2620 2019 Control Handle Assembly Replacement Repair Guide

Difficulty

Easy

Steps

3

Time Required

                          2 - 5 minutes            

Sections

2

• Spark Plug Disconnect
• 1 step
• Control Handle Assembly
• 2 steps

Flags

0

• BackEcho Power Pruner, 25.4 cc PPT-2620 (2019)

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Disconnect the spark plug               

• Move the stop switch into the “stop” position to turn the pruner off before attempting any repairs.
• Pull the spark plug cap straight off of the spark plug.

Move the stop switch into the “stop” position to turn the pruner off before attempting any repairs.

Pull the spark plug cap straight off of the spark plug.

1024

Step 2

              Remove the control handle assembly               

• Use a T25 Torx screwdriver to loosen (but not remove) the two screws clamping the main pipe assembly to the control handle.

Use a T25 Torx screwdriver to loosen (but not remove) the two screws clamping the main pipe assembly to the control handle.

Step 3

• Remove the control handle from the main pipe assembly.

Remove the control handle from the main pipe assembly.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 

                    Adam O'Camb                     

Member since: 04/11/2015

173,479 Reputation

                                      418 Guides authored                  



                       Badges:
                       39







                                                        +36 more badges