Difficulty

Very easy

Steps

3

Time Required

                          5 - 10 minutes

Sections

1

  • Battery
  • 3 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackEarStudio ES100

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

With time this battery may not work properly and prevent the adapter to be turned on. Replacement is quite easy and an alternative battery reference exists : 602035PL (with 500 mAh power)

What you need

Step 1

              Back panel removal
  • To open the device, push hard on the back panel corner close to the 3.5mm jack with the iFixit opening tool. Take care: the back panel will open suddenly
  • Gently push the pack panel up on all sides of the device

To open the device, push hard on the back panel corner close to the 3.5mm jack with the iFixit opening tool. Take care: the back panel will open suddenly

Gently push the pack panel up on all sides of the device

1024

Step 2

              Opening
  • Flip the back panel aside the device. You can now access the battery cable you can safely desolder.

Flip the back panel aside the device. You can now access the battery cable you can safely desolder.

Step 3

              Battery reference
  • The original battery reference SL572035 is discontinued. You can replace it with an alternative battery reference, like the 602035 (3.7 V, 500 mAh) you can find and most spare part markets
  • Warning: do not mismatch with the 602535 battery with a 600 mAh capacity but larger than the 500 mAh one (25 mm versus 20 mm). Make sure the battery size is approximately 20 x 35 x 6 mm.
  • Translation issue. The part section of this article indicates the replacement battery is not available. Actually, it is. Link: https://www.aliexpress.com/item/40010454…

The original battery reference SL572035 is discontinued. You can replace it with an alternative battery reference, like the 602035 (3.7 V, 500 mAh) you can find and most spare part markets

Warning: do not mismatch with the 602535 battery with a 600 mAh capacity but larger than the 500 mAh one (25 mm versus 20 mm). Make sure the battery size is approximately 20 x 35 x 6 mm.

Translation issue. The part section of this article indicates the replacement battery is not available. Actually, it is. Link: https://www.aliexpress.com/item/40010454…

To reassemble the device, glue the battery on the original tape, put the back panel in place making sure not to place it upside-down. Push hard the back panel to clip it to the device main body on all sides. Proceed to a full charge before use.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             


        Maxime is helping us fix the world!      Want to contribute?      Start translating ›

Special thanks to these translators:

100%

Maxime

Author

                                      with 1 other contributor 


                    Maxime

Member since: 10/27/2014

145 Reputation

                                      1 Guide authored                  



                       Badges:
                       4







                                                        +1 more badge