Difficulty

Easy

Steps

7

Time Required

                          10 - 45 minutes

Sections

1

  • E46 M3 door card/panel removal
  • 7 steps

Flags

0

  • Back2000-2006 BMW M3

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Identify the screws
  • The door card is held securely in place with 5 screws.
  • Keep in mind the door card has up to 3 wire bundles attached to it. Be careful when removing it! Be prepared to support it while dealing with the wires.

The door card is held securely in place with 5 screws.

Keep in mind the door card has up to 3 wire bundles attached to it. Be careful when removing it! Be prepared to support it while dealing with the wires.

1024

Step 2

              Remove screw covers
  • Using a spudger, work off the cap of the first screw. The cap is tight; you may need a jimmy or metal spudger.
  • Using the flat end of a spudger, remove the airbag emblem. The emblem has clips on the top and bottom – work carefully.

Using a spudger, work off the cap of the first screw. The cap is tight; you may need a jimmy or metal spudger.

Using the flat end of a spudger, remove the airbag emblem. The emblem has clips on the top and bottom – work carefully.

Step 3

              Remove bolts
  • Using a T20 Torx driver with extension, remove all 5 bolts.

Using a T20 Torx driver with extension, remove all 5 bolts.

Step 4

              Remove mirror control
  • If you’re working on the driver side door, remove the mirror control module. Disconnect it from its wiring plug.

If you’re working on the driver side door, remove the mirror control module. Disconnect it from its wiring plug.

Step 5

              Pop door card clips
  • Using a trim tool or similar, begin at the bottom of the door card and pop the card away from the door frame.
  • After you’ve released the bottom clips, work your way around.
  • You will need to lift the door card from the door frame in order to fully release it. Be careful!

Using a trim tool or similar, begin at the bottom of the door card and pop the card away from the door frame.

After you’ve released the bottom clips, work your way around.

You will need to lift the door card from the door frame in order to fully release it. Be careful!

Step 6

  • Disconnect the following from the door panel:
  • Unlocking cable
  • Speaker cable(s)
  • Set the door panel aside.

Disconnect the following from the door panel:

Unlocking cable

Speaker cable(s)

Set the door panel aside.

Step 7

              Door panel removed!
  • The door panel is now removed.
  • You will see the airbag module, vapor barrier, and other components.

The door panel is now removed.

You will see the airbag module, vapor barrier, and other components.

To reassemble your door, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      3 other people completed this guide.

Author

                    Dom Santangelo

Member since: 09/19/2016

559 Reputation

                                      3 Guides authored                  



                       Badges:
                       17







                                                        +14 more badges