Difficulty
Moderate
Steps
6
Time Required
3 - 5 minutes
Sections
1
- Coil
- 6 steps
Flags
0
BackE-Cigarette Vaporizer
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Coil
- Pull up to remove the top cap from the IPV Mini II.
- The unit may have hot surfaces.
- Allow components to cool before starting.
Pull up to remove the top cap from the IPV Mini II.
The unit may have hot surfaces.
Allow components to cool before starting.
1024
Step 2
- Using a Phillips head screwdriver, turn counter clockwise to loosen the positive and negative screws.
- Be sure that the IPV Mini II is powered off before proceeding.
Using a Phillips head screwdriver, turn counter clockwise to loosen the positive and negative screws.
Be sure that the IPV Mini II is powered off before proceeding.
Step 3
- Gently remove the burnt coil from the positive and negative screws.
Gently remove the burnt coil from the positive and negative screws.
Step 4
- Place the new coil into the holes underneath the positive and negative screws.
Place the new coil into the holes underneath the positive and negative screws.
Step 5
- Using a Phillips screwdriver, gently turn clockwise to tighten down the positive and negative screws onto the coil.
Using a Phillips screwdriver, gently turn clockwise to tighten down the positive and negative screws onto the coil.
Step 6
- Replace the top cap onto the IPV Mini II.
Replace the top cap onto the IPV Mini II.
To reverse the process, simply follow the instructions in reverse.
For more information visit https://bevapehappy.com/
Cancel: I did not complete this guide.
12 other people completed this guide.
Author
with 1 other contributor
rzgraves
Member since: 07/16/2015
624 Reputation
1 Guide authored
Badges:
6
+3 more badges
Team
Texas Tech, Team 3-4, Rauch SU 2015
Member of Texas Tech, Team 3-4, Rauch SU 2015
TTU-RAUCH-SU15S3G4
3 Members
1 Guide authored
