Difficulty

Easy

Steps

8

Time Required

                          2 - 5 minutes

Sections

2

  • Bin
  • 3 steps
  • Battery
  • 5 steps

Flags

0

  • BackDyson V8 Animal

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

Before using this guide check that your battery does not just need to be charged and refer to The Devices LED Flashes troubleshooting page for more information on troubleshooting your battery.

No special skills are required for this guide.

Before beginning, make sure to turn off the vacuum and disconnect it from any external power source.

What you need

Step 1

              Bin
  • Push the red button and slide the connecting shaft off.
  • The shaft must be held from moving when disconnecting from the motor.

Push the red button and slide the connecting shaft off.

The shaft must be held from moving when disconnecting from the motor.

1024

Step 2

  • Pull up on the red tab and continue to slide the motor completely up.
  • The dust bin will open on the bottom.

Pull up on the red tab and continue to slide the motor completely up.

The dust bin will open on the bottom.

Step 3

  • Push the red tab down.
  • Pull the dust bin out from the handle head.

Push the red tab down.

Pull the dust bin out from the handle head.

Step 4

              Battery
  • Push down on the red tab.

Push down on the red tab.

Step 5

  • Push down on the red tab on the other side.
  • Pull the motor away from the handle.
  • You may need to hold down the handle while sliding the motor off.

Push down on the red tab on the other side.

Pull the motor away from the handle.

You may need to hold down the handle while sliding the motor off.

Step 6

  • Use a Phillips #0 screwdriver to remove two 18 mm screws on the bottom of the battery.

Use a Phillips #0 screwdriver to remove two 18 mm screws on the bottom of the battery.

Step 7

  • Use a Phillips #0 screwdriver to remove one 18 mm screw on the back of the handle.

Use a Phillips #0 screwdriver to remove one 18 mm screw on the back of the handle.

Step 8

  • Slide the battery out from handle.
  • The handle must be held from moving while sliding the battery out.

Slide the battery out from handle.

The handle must be held from moving while sliding the battery out.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      7 other people completed this guide.

Author

                                      with 4 other contributors 


                    AJ McLean-Scholz

Member since: 01/23/2020

643 Reputation

                                      5 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges

Team

                       Cal Poly, Team S19-G1, White Winter 2020                        

                                                  Member of Cal Poly, Team S19-G1, White Winter 2020 



                    CPSU-WHITE-W20S19G1                     


                                            4 Members                     


                                            10 Guides authored

Drillbatterycomau - Sep 24, 2021

Reply

Replacement Vacuum Cleaner Batteries for Dyson V8 Animal

Battery Type:   Li-ion

Voltage:   21.6V

Capacity:   4000mAh

Color:   Grey

Weight:   770.26g

Dimensions: 145.00 x 90.10 x 115.90mm

If you intereted in this battery, please view more info on http://www.drillbattery.com.au/orderbatt…