Dyson V6 Motorhead Brush Bar Replacement Repair Guide

Difficulty

Easy

Steps

3

Time Required

                          1 minute            

Sections

1

• Brush Bar
• 3 steps

Flags

0

• BackDyson V6 Motorhead

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Brush Bar               

• Press the button to disconnect the vacuum head from the connecting pole.

Press the button to disconnect the vacuum head from the connecting pole.

1024

Step 2

• Turn the end cap counterclockwise using the iFixit Opening Tool.
• If you do not have an iFixit Opening Tool, a quarter may be used instead.

Turn the end cap counterclockwise using the iFixit Opening Tool.

If you do not have an iFixit Opening Tool, a quarter may be used instead.

Step 3

• Pull the brush bar out of the housing.

Pull the brush bar out of the housing.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      3 other people completed this guide.                                             

Author

                                      with 5 other contributors 

                    Addie Hedge                     

Member since: 01/24/2017

695 Reputation

                                      5 Guides authored                  



                       Badges:
                       13







                                                        +10 more badges                           

Team

                       Cal Poly, Team 22-6, Maness Winter 2017                        

                                                  Member of Cal Poly, Team 22-6, Maness Winter 2017 



                    CPSU-MANESS-W17S22G6                     


                                            4 Members                     


                                            5 Guides authored                     

dooleyew - Jan 11, 2018

Reply

Not so fast, there are teeth on the lower roll insert that can interfere with teeth on the housing. Is there a purpose for these teeth, maybe manufacturing mold release? My brush roll will not turn when re-installed. It installs easily, powers up, spins about 4 or 5 revolutions, then shuts off power for a second, then comes back on without the roller spinning at all. I can see it is the teeth interlocking but don’t know how it makes the first 4 or 5 revs. Very strange indeed!!

Dave Duddleston - Jan 16, 2019

Reply

I have the same problem, where the teeth seem to be engaging and stopping the revolutions. Any fix for this?

Donna Sweeney - Mar 19, 2020

Reply

I have the same problem and I never signed up for the warranty.

Roger and Karen Risch - Jul 6, 2020

Reply

My motorhead works intermittely. I took it apart and cleaned everything to no avail. The guy at Starks vacuum in Sherwood OR said it was plugged and he would take it apart and clean it for $100. Hmmmm, what can he clean that I can’t?