Difficulty
Moderate
Steps
11
Time Required
5 - 10 minutes
Sections
3
- Bin
- 4 steps
- Main Body
- 4 steps
- Cyclone
- 3 steps
Flags
0
BackDyson v6 Absolute
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Bin
- Unplug the device.
Unplug the device.
1024
Step 2
- Push down the red lever located on the outside of the bin, next to the device handle, to open the door to the debris bin.
- Avoid pressing the trigger on the handle opposite the red lever, which activates the motor.
Push down the red lever located on the outside of the bin, next to the device handle, to open the door to the debris bin.
Avoid pressing the trigger on the handle opposite the red lever, which activates the motor.
Step 3
- Push the red lever down a second time to release the debris bin.
- Avoid pressing the trigger on the handle opposite the red lever, which activates the motor.
Push the red lever down a second time to release the debris bin.
Step 4
- Pull bin away from the cyclone.
Pull bin away from the cyclone.
Step 5
Main Body
- Separate the bin from the main body of the device.
Separate the bin from the main body of the device.
Step 6
- Locate two visible white clips between the main body and the cyclone.
Locate two visible white clips between the main body and the cyclone.
Step 7
- Use tweezers to pinch the white clips together.
- Widely hold the tweezers apart to get them to reach between the two white clips.
- Because the space is tight between the cyclone and the main body, pinching the white clips may require additional effort.
Use tweezers to pinch the white clips together.
Widely hold the tweezers apart to get them to reach between the two white clips.
Because the space is tight between the cyclone and the main body, pinching the white clips may require additional effort.
Step 8
- Tilt and pull the main body away from the cyclone.
- There may be a loud snap when the main body separates from the cyclone.
Tilt and pull the main body away from the cyclone.
There may be a loud snap when the main body separates from the cyclone.
Step 9
Cyclone
- Use the spudger to remove the cyclone.
- Start at the small opening beneath the place where the cyclone connects to the main body.
- Work the spudger around the rim of the red screen filter.
- You will hear popping noises.
Use the spudger to remove the cyclone.
Start at the small opening beneath the place where the cyclone connects to the main body.
Work the spudger around the rim of the red screen filter.
You will hear popping noises.
Step 10
- Use a T9 Torx screwdriver to remove five 14mm screws from the edge of the screen filter body.
Use a T9 Torx screwdriver to remove five 14mm screws from the edge of the screen filter body.
Step 11
- Remove the filter screen cover away from the cyclone.
- Pull down on the black tube inside the cyclone body to remove it from the cyclone.
Remove the filter screen cover away from the cyclone.
Pull down on the black tube inside the cyclone body to remove it from the cyclone.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
13 other people completed this guide.
Author
with 2 other contributors
Tabitha Espina Velasco
Member since: 01/23/2017
3,375 Reputation
5 Guides authored
Badges:
16
+13 more badges
Team
Washington State, Team 1-2, Staggers Spring 2017
Member of Washington State, Team 1-2, Staggers Spring 2017
WSU-STAGGERS-S17S1G2
2 Members
20 Guides authored
