Difficulty

Easy

Steps

7

Time Required

                          25 - 30 minutes

Sections

1

  • Brush
  • 7 steps

Flags

0

  • BackDyson v6 Absolute

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

Before using this guide, visually inspect the brush roll while the vacuum is running to determine whether or not rolling occurs. If the brush roll is functioning properly yet the vacuum isn’t collecting dust or debris from the floor, please consult another guide regarding blockage or another electrical issue. If the brush roll remains inert while the vacuum is running, these easy steps should return your product to working order.

What you need

Step 1

              Brush
  • Disassemble the vacuum by depressing the buttons and pulling each piece from its station.

Disassemble the vacuum by depressing the buttons and pulling each piece from its station.

1024

Step 2

  • Use a small coin to open the brush bar protector. Turn counterclockwise.

Use a small coin to open the brush bar protector. Turn counterclockwise.

Step 3

  • Remove brush roll bar and brush away visible excess from the bristles. Remove tangled hair from head unit roll bar in the if necessary.

Remove brush roll bar and brush away visible excess from the bristles. Remove tangled hair from head unit roll bar in the if necessary.

Step 4

  • Lightly dip cotton swab into rubbing alcohol. Gently wipe the electrical connection points to remove residuals.

Lightly dip cotton swab into rubbing alcohol. Gently wipe the electrical connection points to remove residuals.

Step 5

  • Repeat process from Step 4 for each connection point throughout the apparatus.

Repeat process from Step 4 for each connection point throughout the apparatus.

Step 6

  • Reassemble vacuum (see Step 1 for steps if necessary). Depress power switch to ensure proper connection.

Reassemble vacuum (see Step 1 for steps if necessary). Depress power switch to ensure proper connection.

Step 7

  • Once electrical connection is verified, depress the power switch while visually inspecting brush roll. If rolling occurs, continue as normal. If not, repeat steps as needed.

Once electrical connection is verified, depress the power switch while visually inspecting brush roll. If rolling occurs, continue as normal. If not, repeat steps as needed.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 


                    Luke Johnson

Member since: 09/25/2021

145 Reputation

                                      1 Guide authored                  



                       Badges:
                       2

Team

                       University of North Texas, Team 1-12, Friess Fall 2021                        

                                                  Member of University of North Texas, Team 1-12, Friess Fall 2021 



                    UNT-FRIESS-F21S1G12                     


                                            1 Member                     


                                            2 Guides authored