Difficulty

Moderate

Steps

10

Time Required

                          20 - 30 minutes

Sections

2

  • Battery
  • 7 steps
  • Motor
  • 3 steps

Flags

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

Incorrect Tools

Help make this guide better by using the correct tools in images and/or text.

  • BackDyson DC56

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Make sure the vacuum is unplugged from charger.
  • Warning: Avoid pressing red trigger because the vacuum will turn on the device and begin suction.

Make sure the vacuum is unplugged from charger.

Warning: Avoid pressing red trigger because the vacuum will turn on the device and begin suction.

1024

Step 2

  • Locate the purple button at the top of the device.

Locate the purple button at the top of the device.

Step 3

  • Separate the device with the purple button.

Separate the device with the purple button.

Step 4

  • Take out the filter.

Take out the filter.

Step 5

  • Locate and remove the 10mm Phillips head screw using a Phillips #1 screw driver.

Locate and remove the 10mm Phillips head screw using a Phillips #1 screw driver.

Step 6

              Battery screw 2
  • Locate and remove #000 25mm phillips screw on the reverse side of the vacuum

Locate and remove #000 25mm phillips screw on the reverse side of the vacuum

Step 7

  • Pull the battery pack down and away from the main body and remove it from the device.

Pull the battery pack down and away from the main body and remove it from the device.

Step 8

              Motor
  • Take out the 10mm screw using a Phillips #1 screwdriver.

Take out the 10mm screw using a Phillips #1 screwdriver.

Step 9

  • Use a spudger to separate the back plate covering the motor.
  • Be careful when trying to remove the motor with a metal spudger. Be sure your battery is removed before trying to fully remove the motor.

Use a spudger to separate the back plate covering the motor.

Be careful when trying to remove the motor with a metal spudger. Be sure your battery is removed before trying to fully remove the motor.

Step 10

  • Use a flat spudger to loosen and remove the motor out of the vacuum.

Use a flat spudger to loosen and remove the motor out of the vacuum.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 4 other contributors 


                    John Czerkawski

Member since: 10/02/2017

421 Reputation

                                      4 Guides authored                  



                       Badges:
                       6







                                                        +3 more badges

Team

                       USF Tampa, Team S10-G1, Thompson Fall 2017                        

                                                  Member of USF Tampa, Team S10-G1, Thompson Fall 2017 



                    USFT-THOMPSON-F17S10G1                     


                                            4 Members                     


                                            11 Guides authored