Difficulty
Very easy
Steps
2
Time Required
10 - 20 seconds
Sections
- Bin
- 1 step
- Pre-filter
- 1 step
Flags
0
BackDyson DC39 Origin
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
Step 1
Bin
- Push down on the gray button located next to the power button to release the bin from the ball housing.
- Pull the bin away, then up from the ball housing to remove it.
- If the bin won’t fit back into place during re-assembly, you may need to push the grey button again.
Push down on the gray button located next to the power button to release the bin from the ball housing.
Pull the bin away, then up from the ball housing to remove it.
If the bin won’t fit back into place during re-assembly, you may need to push the grey button again.
1024
Step 2
Pre-filter
- Remove the purple pre-filter by pulling it up and out of the bin.
Remove the purple pre-filter by pulling it up and out of the bin.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 2 other contributors
Luke Matusiak
Member since: 04/26/2017
479 Reputation
3 Guides authored
Badges:
12
+9 more badges
Team
Cal Poly, Team S23-G6, Livingston Spring 2017
Member of Cal Poly, Team S23-G6, Livingston Spring 2017
CPSU-LIVINGSTON-S17S23G6
3 Members
6 Guides authored
