Dyson Dc39 Origin Cyclone Filter Replacement Repair Guide

Difficulty

Easy

Steps

Time Required

                          5 - 10 minutes

Sections

Bin
1 step
Pre-filter
1 step
Cyclone Filter
3 steps

Flags

BackDyson DC39 Origin
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

Bin

Push down on the gray button located next to the power button to release the bin from the ball housing.
Pull the bin away, then up from the ball housing to remove it.
If the bin won’t fit back into place during re-assembly, you may need to push the grey button again.

Push down on the gray button located next to the power button to release the bin from the ball housing.

Pull the bin away, then up from the ball housing to remove it.

If the bin won’t fit back into place during re-assembly, you may need to push the grey button again.

1024

Step 2

              Pre-filter

Remove the purple pre-filter by pulling it up and out of the bin.

Remove the purple pre-filter by pulling it up and out of the bin.

Step 3

              Cyclone Filter

Push down on the red button, located on top of the bin, to release the bottom section of the bin.

Push down on the red button, located on top of the bin, to release the bottom section of the bin.

Step 4

Push the grey button located in between the parts of the red lever to release the clear, bottom section of the bin.
The grey button can only be pressed after the bottom section is open.

Push the grey button located in between the parts of the red lever to release the clear, bottom section of the bin.

The grey button can only be pressed after the bottom section is open.

Step 5

You should notice several notches around the rim of the filter. Slide the plastic opening tool around the rim to release the notches.
After releasing all of the notches, pull the filter away from the orange cyclone assembly to remove it from the bin.

You should notice several notches around the rim of the filter. Slide the plastic opening tool around the rim to release the notches.

After releasing all of the notches, pull the filter away from the orange cyclone assembly to remove it from the bin.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      3 other people completed this guide.

Author

                                      with 2 other contributors

                    Sam Nelson

Member since: 04/26/2017

167 Reputation

                                      1 Guide authored                  



                       Badges:
                       7







                                                        +4 more badges

Team

                       Cal Poly, Team S23-G6, Livingston Spring 2017                        

                                                  Member of Cal Poly, Team S23-G6, Livingston Spring 2017 



                    CPSU-LIVINGSTON-S17S23G6                     


                                            3 Members                     


                                            6 Guides authored

Introduction#

What you need#

Team#

Introduction

What you need

Team