Dyson Dc28 Animal Wheel Replacement Repair Guide

Difficulty

Easy

Steps

Time Required

                          5 minutes

Sections

Wheel
5 steps

Flags

BackDyson DC28 Animal
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Wheel

Flip the vacuum face down with the wheels facing up.

Flip the vacuum face down with the wheels facing up.

1024

Step 2

Start on the right side wheel of the vacuum cleaner
Remove the plastic wheel cap by sliding the tip of the metal spudger under the edge of the cap.
Gently pry off the plastic cap

Start on the right side wheel of the vacuum cleaner

Remove the plastic wheel cap by sliding the tip of the metal spudger under the edge of the cap.

Gently pry off the plastic cap

Step 3

Identify the e-clip located under the metal axle.
The e-clip is very small and may be hard to identify. It is a small metal ring between the metal axle and the plastic wheel.
Use the metal spudger to pry off the e-clip.
The e-clip is hard to remove and may require extra force.

Identify the e-clip located under the metal axle.

The e-clip is very small and may be hard to identify. It is a small metal ring between the metal axle and the plastic wheel.

Use the metal spudger to pry off the e-clip.

The e-clip is hard to remove and may require extra force.

Step 4

Slide off the plastic wheel off of the metal axle
Be careful when removing plastic wheel. There is a loose metal washer and black axle piston behind the wheel that can easily fall off.
Slide off the metal washer and black axle piston from the metal axle

Slide off the plastic wheel off of the metal axle

Be careful when removing plastic wheel. There is a loose metal washer and black axle piston behind the wheel that can easily fall off.

Slide off the metal washer and black axle piston from the metal axle

Step 5

Remove the metal axle by pulling on the left wheel. This does not take a lot of force and should easily slide out.
Repeat steps 2, 3, and 4 to remove the left side wheel from the metal axle.

Remove the metal axle by pulling on the left wheel. This does not take a lot of force and should easily slide out.

Repeat steps 2, 3, and 4 to remove the left side wheel from the metal axle.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors

                    Zachary Urciuoli

Member since: 01/27/2017

101 Reputation

                                      1 Guide authored                  



                       Badges:
                       2

Team

                       Cal Poly, Team 21-4, Maness Winter 2017                        

                                                  Member of Cal Poly, Team 21-4, Maness Winter 2017 



                    CPSU-MANESS-W17S21G4                     


                                            5 Members                     


                                            10 Guides authored

Introduction#

What you need#

Team#

Introduction

What you need

Team