Difficulty

Moderate

Steps

7

Time Required

                          10 minutes

Sections

1

  • Power Button
  • 7 steps

Flags

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackDyson Ball Animal

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Power Button
  • Turn off and unplug the vacuum

Turn off and unplug the vacuum

1024

Step 2

  • Press the red release button and pull the canister up and away.

Press the red release button and pull the canister up and away.

Step 3

  • Locate the red dial at the back of the wand and turn counterclockwise to detach the wand.

Locate the red dial at the back of the wand and turn counterclockwise to detach the wand.

Step 4

  • Remove the four 15mm screws behind the power button using a Torx T15 screwdriver.

Remove the four 15mm screws behind the power button using a Torx T15 screwdriver.

Step 5

  • Use a spudger to push the two clamp tabs behind the power button towards the middle of the vacuum.

Use a spudger to push the two clamp tabs behind the power button towards the middle of the vacuum.

Step 6

  • Detach the power box case from the body of the Dyson after both clamps have been pushed out.
  • Upon removal of this case, you will be able to see a red circular power button.

Detach the power box case from the body of the Dyson after both clamps have been pushed out.

Upon removal of this case, you will be able to see a red circular power button.

Step 7

  • Gently pull the power button out of its slot as shown.
  • Detach the power button box from the two wires connecting it, and replace the faulty power button box with a functional one. The power button is the first black one.

Gently pull the power button out of its slot as shown.

Detach the power button box from the two wires connecting it, and replace the faulty power button box with a functional one. The power button is the first black one.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      3 other people completed this guide.

Author

                                      with 5 other contributors 


                    Hank Wai

Member since: 05/07/2017

151 Reputation

                                      1 Guide authored                  



                       Badges:
                       6







                                                        +3 more badges

Team

                       Cal Poly, Team S15-G5, Banghart Spring 2017                        

                                                  Member of Cal Poly, Team S15-G5, Banghart Spring 2017 



                    CPSU-BANGHART-S17S15G5                     


                                            4 Members                     


                                            16 Guides authored