Difficulty

Easy

Steps

5

Time Required

                          3 minutes

Sections

1

  • Hose
  • 5 steps

Flags

0

  • BackDyson Ball Animal

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Hose
  • Turn off power and unplug the vacuum, then turn the vacuum to look at the hose.

Turn off power and unplug the vacuum, then turn the vacuum to look at the hose.

1024

Step 2

  • Turn the red dial counterclockwise and pull up on the wand to remove.

Turn the red dial counterclockwise and pull up on the wand to remove.

Step 3

  • Press in the red button where the wand attaches to the hose and pull apart.

Press in the red button where the wand attaches to the hose and pull apart.

Step 4

  • Remove the main canister by pressing the red release button and pulling up and away.

Remove the main canister by pressing the red release button and pulling up and away.

Step 5

  • Grip the base of the hose so your thumb reaches around to press the red tab shown.
  • Push the red tab at towards the hose while pulling the hose upwards.
  • With some wiggling, it will come out.

Grip the base of the hose so your thumb reaches around to press the red tab shown.

Push the red tab at towards the hose while pulling the hose upwards.

With some wiggling, it will come out.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      11 other people completed this guide.

Author

                                      with 4 other contributors 


                    Mitchell Klein

Member since: 04/23/2017

719 Reputation

                                      2 Guides authored                  



                       Badges:
                       11







                                                        +8 more badges

Team

                       Cal Poly, Team S15-G5, Banghart Spring 2017                        

                                                  Member of Cal Poly, Team S15-G5, Banghart Spring 2017 



                    CPSU-BANGHART-S17S15G5                     


                                            4 Members                     


                                            16 Guides authored

james gaspard - Oct 28, 2019

Reply

I used the hose and attachments on my ball animal + up13 and after removal of attachment and stowing the hose to the handle assy. , I can not get the vacumm to stop sucking from the top of the handle? I’ve attempted reading the owners manual (which is not user friendly) and also watched Youtube demonstrations with no luck. This has been two days of struggling with no success???

mike.vardy - Jan 1, 2020

Reply

The suction is diverted to the hose when the machine is upright. Stand behind the machine, pull the handle towards you and the transfer valve automatically diverts the suction to the brush head. Put it back into the upright position and suction automatically diverts to the rear hose.

Rita & Chuck Mergen - Aug 22, 2020

Reply

can anyone show me a picture of the transfer valve? I think it is not going into position when I try to use the wand.

woody jones - Oct 10, 2020

Reply

it looks like the wand has a round plastic device in middle is this correct? i have taken the wand out of the hose and the hose has suction but when all goes back together and turn on the hand held wand device has no suction

jboyd5322 - Jun 4, 2021

Reply

Awesome! Worked like a charm. I had sucked up one of the cat’s toys. I was able to remove the little toy and the hose works again.

Thank you!