Dynex Dx Wbrdvd1 Wifi Antenna Replacement Repair Guide

Difficulty

Easy

Steps

6

Time Required

                          5 - 15 minutes            

Sections

2

• Top Cover
• 3 steps
• WiFi Antenna
• 3 steps

Flags

0

• BackDynex DX-WBRDVD1

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Top Cover               

• Remove the four 5mm Phillips #1 screws that connect the black outer shell to the silver back of the device.

Remove the four 5mm Phillips #1 screws that connect the black outer shell to the silver back of the device.

1024

Step 2

• Remove the two 5mm screws on the left and right side panels.
• There is one screw on each side that secures the cover to the body of the device.

Remove the two 5mm screws on the left and right side panels.

There is one screw on each side that secures the cover to the body of the device.

Step 3

• Lift the black cover to a 45 degree angle from the rear of the device and pull the cover away entirely.
• Check that the power cord is not preventing the device from opening or closing.

Lift the black cover to a 45 degree angle from the rear of the device and pull the cover away entirely.

Check that the power cord is not preventing the device from opening or closing.

Step 4

              WiFi Antenna               

• Use the metal spudger to remove the white clip from the antenna by prying the clip away from the antenna.
• Use a pointed tool and press down on the indents on both sides of the clip to loosen.

Use the metal spudger to remove the white clip from the antenna by prying the clip away from the antenna.

Use a pointed tool and press down on the indents on both sides of the clip to loosen.

Step 5

• Remove the two 7mm screws from both sides of the antenna.

Remove the two 7mm screws from both sides of the antenna.

Step 6

• Slide the antenna inwards and gently remove.

Slide the antenna inwards and gently remove.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      3 other people completed this guide.                                             

Author

                                      with 5 other contributors 

                    josh sorenson                     

Member since: 04/05/2018

115 Reputation

                                      1 Guide authored                  



                       Badges:
                       8







                                                        +5 more badges                           

Team

                       Linn Benton Community College, Team S1-G2, Johnson Spring 2018                        

                                                  Member of Linn Benton Community College, Team S1-G2, Johnson Spring 2018 



                    LBCC-JOHNSON-S18S1G2                     


                                            4 Members                     


                                            6 Guides authored