Dymo Labelmanager 160 Keyboard Replacement Repair Guide

Difficulty

Easy

Steps

6

Time Required

                          5 minutes            

Sections

2

• Batteries
• 2 steps
• Keyboard
• 4 steps

Flags

0

• BackDymo LabelManager 160

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Batteries               

• Place the device face-down to access the battery compartment.

Place the device face-down to access the battery compartment.

1024

Step 2

• Remove the compartment cover to reveal the batteries. Remove the 6 old batteries.

Remove the compartment cover to reveal the batteries. Remove the 6 old batteries.

Step 3

              Keyboard               

• To open the cartridge compartment, simply lift on the front of the device.

To open the cartridge compartment, simply lift on the front of the device.

Step 4

• Using a Phillips #0 screwdriver, remove the four 1.3mm screws from the cartridge compartment and two 1.2mm screws from the battery compartment.

Using a Phillips #0 screwdriver, remove the four 1.3mm screws from the cartridge compartment and two 1.2mm screws from the battery compartment.

Step 5

• Using a spudger or other tool, lift and remove the front of the device. This should be done all around the device to ensure the two parts split correctly.

Using a spudger or other tool, lift and remove the front of the device. This should be done all around the device to ensure the two parts split correctly.

Step 6

• Gently remove the rubber keyboard from the device.

Gently remove the rubber keyboard from the device.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 5 other contributors 

                    Matthew Jenkins                     

Member since: 01/27/2016

232 Reputation

                                      2 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges                           

Team

                       University of Alabama, Team 1-4, Sydow campbell Spring 2016                        

                                                  Member of University of Alabama, Team 1-4, Sydow campbell Spring 2016 



                    UA-SYDOW CAMPBELL-S16S1G4                     


                                            4 Members                     


                                            4 Guides authored                     

Zachary Parker - Nov 8, 2018

Reply

Group 9: Over all looks great. Screwdriver at top of page should be under tools not parts.

In Step 4 the screws in the second picture 2x 1.2mm should be circled in orange and should be a separate bullet with appropriate coloring.

Possibly add a picture using the spudger, so the user knows exactly where they need to pry.

Fantastic lighting and clear pictures!

willow williams - Sep 1, 2019

Reply

Where do I get a replacement key boars