Difficulty
Easy
Steps
5
Time Required
10 - 15 minutes
Sections
1
- Bit Chuck
- 5 steps
Flags
3
Needs Better Images
Better photos will improve this guide. Help out by taking, editing, or uploading new ones!
Markup Mishap
This guide needs better markups. Help out by correcting or making some markup annotations.
Better Introduction
Improve this guide by completing or revising its introduction.
BackDurofix RV332
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Bit Chuck
- Remove the six 13 mm casing screws with the #0 Phillips screwdriver.
Remove the six 13 mm casing screws with the #0 Phillips screwdriver.
1024
Step 2
- Separate the screwdriver casing halves with the plastic opening tool.
Separate the screwdriver casing halves with the plastic opening tool.
Step 3
- Slide the bit chuck assembly out from the casing half.
Slide the bit chuck assembly out from the casing half.
Step 4
- Apply a dab of grease to the end of the drill motor coupler.
Apply a dab of grease to the end of the drill motor coupler.
Step 5
- Insert new bit chuck assembly into the drill casing.
Insert new bit chuck assembly into the drill casing.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 2 other contributors
Tyler Vincent
Member since: 02/24/2014
464 Reputation
4 Guides authored
Badges:
9
+6 more badges
Team
Michigan Tech, Team 5-5, Lauer Spring 2014
Member of Michigan Tech, Team 5-5, Lauer Spring 2014
MTU-LAUER-S14S5G5
3 Members
5 Guides authored
