Difficulty

Moderate

Steps

7

Time Required

                          20 minutes

Sections

1

  • Screen
  • 7 steps

Flags

0

  • BackMotorola Droid Ultra

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Screen
  • Gently remove SIM card tray from device using a metal spudger.

Gently remove SIM card tray from device using a metal spudger.

1024

Step 2

  • After SIM card tray is removed press the spudger between the plastic case and the frame of the device until you hear a snap.
  • Work your way around the device until all the clips are undone.
  • Be gentle with the plastic to make sure it doesn’t crack or break.

After SIM card tray is removed press the spudger between the plastic case and the frame of the device until you hear a snap.

Work your way around the device until all the clips are undone.

Be gentle with the plastic to make sure it doesn’t crack or break.

Step 3

  • Remove the five screws on top of the device with a T5 Torx.
  • Remove the single screw holding the camera with a T4 Torx.
  • Remove the two screws on the bottom of the device with a T5 Torx.

Remove the five screws on top of the device with a T5 Torx.

Remove the single screw holding the camera with a T4 Torx.

Remove the two screws on the bottom of the device with a T5 Torx.

Step 4

  • Once the screws are removed, use a nylon spudger and lift up on the two plastic pieces that were secured by the screws.

Once the screws are removed, use a nylon spudger and lift up on the two plastic pieces that were secured by the screws.

Step 5

  • Remove the four T5 Torx screws securing the motherboard.

Remove the four T5 Torx screws securing the motherboard.

Step 6

  • Gently pry the motherboard out of the frame using the plastic opening tool.

Gently pry the motherboard out of the frame using the plastic opening tool.

Step 7

  • Once motherboard is removed you have successfully removed the screen from the device.

Once motherboard is removed you have successfully removed the screen from the device.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    knoyes

Member since: 10/30/2018

785 Reputation

                                      5 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges

Team

                       UMass Dartmouth, Team S3-G8, Peak Fall 2018                        

                                                  Member of UMass Dartmouth, Team S3-G8, Peak Fall 2018 



                    UMASSD-PEAK-F18S3G8                     


                                            3 Members                     


                                            10 Guides authored