Difficulty

Moderate

Steps

7

Time Required

                          35 minutes

Sections

1

  • Power Button
  • 7 steps

Flags

0

  • BackMotorola Droid Ultra

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Power Button
  • Gently remove the SIM card tray from the device using a spudger.

Gently remove the SIM card tray from the device using a spudger.

1024

Step 2

  • After SIM card removal press the spudger between the plastic case and the frame until you hear a snap.
  • Work your way around the device until all the clips are released.
  • Be gentle while doing this so you don’t crack or break the plastic.

After SIM card removal press the spudger between the plastic case and the frame until you hear a snap.

Work your way around the device until all the clips are released.

Be gentle while doing this so you don’t crack or break the plastic.

Step 3

  • Remove the five screws on top of the device with a T5 Torx.
  • Remove the single screw holding the camera with a T4 Torx.
  • Remove the two screws on the bottom of the device with a T5 Torx.

Remove the five screws on top of the device with a T5 Torx.

Remove the single screw holding the camera with a T4 Torx.

Remove the two screws on the bottom of the device with a T5 Torx.

Step 4

  • Once the screws are removed, use a nylon spudger and lift up on the two plastic pieces that were secured by the screws.

Once the screws are removed, use a nylon spudger and lift up on the two plastic pieces that were secured by the screws.

Step 5

  • Remove the four T5 Torx screws securing the motherboard.

Remove the four T5 Torx screws securing the motherboard.

Step 6

  • Gently pry the motherboard out of the frame using the plastic opening tool.

Gently pry the motherboard out of the frame using the plastic opening tool.

Step 7

  • Once motherboard is removed you have gained access to the power button.
  • Gently, using a pair of angled tweezers pull on the power button to remove it.

Once motherboard is removed you have gained access to the power button.

Gently, using a pair of angled tweezers pull on the power button to remove it.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 


                    knoyes

Member since: 10/30/2018

785 Reputation

                                      5 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges

Team

                       UMass Dartmouth, Team S3-G8, Peak Fall 2018                        

                                                  Member of UMass Dartmouth, Team S3-G8, Peak Fall 2018 



                    UMASSD-PEAK-F18S3G8                     


                                            3 Members                     


                                            10 Guides authored