Dremel 8220 Power Switch Replacement Repair Guide

Difficulty

Easy

Steps

6

Time Required

                          5 minutes            

Sections

1

• Power Switch
• 6 steps

Flags

2

Needs More Images

A few more images would make this guide’s procedures crystal clear.

Slice and Dice

The steps in this guide should be split up and made into a series of prerequisite guides.

• BackDremel 8220

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Power Switch               

• Locate the battery at the back of your Dremel. Firmly grasp the battery on both sides and pull. It should easily come out of the battery well.

Locate the battery at the back of your Dremel. Firmly grasp the battery on both sides and pull. It should easily come out of the battery well.

1024

Step 2

• Remove the ring located around the speed selector switch by pulling apart on either side. This should require very minimal force.

Remove the ring located around the speed selector switch by pulling apart on either side. This should require very minimal force.

Step 3

• Remove the collar wrench by pushing the gear lock button. Continue to hold this button as you rotate the wrench counter-clockwise until it is removed.

Remove the collar wrench by pushing the gear lock button. Continue to hold this button as you rotate the wrench counter-clockwise until it is removed.

Step 4

• Remove the metal clasp from the battery well. This piece helps hold the plastic shell of the device together. Pry it out by gently applying some force with a screwdriver.

Remove the metal clasp from the battery well. This piece helps hold the plastic shell of the device together. Pry it out by gently applying some force with a screwdriver.

Step 5

• Remove five T9 Torx screws from the side of the tool.
• Now pull apart the plastic shell of the device. If you are not able to, review the previous steps as you may have missed one.

Remove five T9 Torx screws from the side of the tool.

Now pull apart the plastic shell of the device. If you are not able to, review the previous steps as you may have missed one.

Step 6

• Remove the faulty power switch. It should come out of the device without using any force.

Remove the faulty power switch. It should come out of the device without using any force.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      3 other people completed this guide.                                             

Author

                                      with 3 other contributors 

                    Shailing Santiago                     

Member since: 03/08/2016

373 Reputation

                                      2 Guides authored                  



                       Badges:
                       12







                                                        +9 more badges                           

Team

                       UMass Dartmouth, Team 2-8, Isaacson Spring 2016                        

                                                  Member of UMass Dartmouth, Team 2-8, Isaacson Spring 2016 



                    UMASSD-ISAACSON-S16S2G8                     


                                            3 Members                     


                                            5 Guides authored                     

christooher t - May 17, 2017

Reply

Awesome!! Thanks!