Dremel 7300 Minimite Cordless Motor Shaft Assembly Replacement Repair Guide

Difficulty

Easy

Steps

Time Required

                          5 minutes

Sections

Battery
1 step
Motor-Shaft Assembly
3 steps

Flags

BackDremel 7300 MiniMite Cordless
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Battery

Pull back on the release tabs to disconnect the battery pack from the housing.
When installing a new battery, you may need to charge it before using it.

Pull back on the release tabs to disconnect the battery pack from the housing.

When installing a new battery, you may need to charge it before using it.

1024

Step 2

              Motor-Shaft Assembly

Remove the two screws from the back of the device with the TR10 Torx Security screwdriver.
Make sure you have removed the battery before proceeding as accidentally powering-on the device while disassembling is dangerous due to the high-speed components inside.

Remove the two screws from the back of the device with the TR10 Torx Security screwdriver.

Make sure you have removed the battery before proceeding as accidentally powering-on the device while disassembling is dangerous due to the high-speed components inside.

Step 3

Lift off the unscrewed plastic cover at an angle, away from the tip of the device.
Gently lift the cover. It won’t take much force to remove it.

Lift off the unscrewed plastic cover at an angle, away from the tip of the device.

Gently lift the cover. It won’t take much force to remove it.

Step 4

Lift the tip of the motor-shaft assembly gently, then pull the assembly out.
The blue battery contact and the spring for the shaft lock button may pop out when you remove the motor-shaft assembly. Make sure to keep track of these pieces, as they are very small.

Lift the tip of the motor-shaft assembly gently, then pull the assembly out.

The blue battery contact and the spring for the shaft lock button may pop out when you remove the motor-shaft assembly. Make sure to keep track of these pieces, as they are very small.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      3 other people completed this guide.

Author

                                      with 5 other contributors

                    Michael Smith

Member since: 02/10/2016

175 Reputation

                                      1 Guide authored                  



                       Badges:
                       7







                                                        +4 more badges

Team

                       USF Tampa, Team 3-4, Sullivan Spring 2016                        

                                                  Member of USF Tampa, Team 3-4, Sullivan Spring 2016 



                    USFT-SULLIVAN-S16S3G4                     


                                            4 Members                     


                                            4 Guides authored

Introduction#

What you need#

#

#

#

#

#

#

Team#

#

Introduction

What you need

Team