Dreamgear Quad Dock Pro Power Board Replacement Repair Guide

Difficulty

Very easy

Steps

9

Time Required

                          5 - 10 minutes            

Sections

3

• Prerequisite Guide to Accessing Interior
• 3 steps
• Mother Board
• 3 steps
• Power Board
• 3 steps

Flags

0

• BackdreamGEAR Quad Dock Pro

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Prerequisite Guide to Accessing Interior               

• Remove the rubber foot pads on the bottom of the device using a plastic opening tool.

Remove the rubber foot pads on the bottom of the device using a plastic opening tool.

1024

Step 2

• Remove the six 2 mm PH0 screws on the bottom of the device.
• Four of those screws are located under the foot pads.

Remove the six 2 mm PH0 screws on the bottom of the device.

Four of those screws are located under the foot pads.

Step 3

• Gently remove the bottom of the device.

Gently remove the bottom of the device.

Step 4

              Mother Board               

• Remove the four 1.8 mm J1 screws.
• Remove the two 2mm PH0 screws.

Remove the four 1.8 mm J1 screws.

Remove the two 2mm PH0 screws.

Step 5

• Gently pick up the mother board
• Pick the mother board straight up or you may risk damaging the mini-USB charging ports.

Gently pick up the mother board

Pick the mother board straight up or you may risk damaging the mini-USB charging ports.

Step 6

• Use a plastic opening tool or similar tool to gently pry the power ribbon cord out of its port.

Use a plastic opening tool or similar tool to gently pry the power ribbon cord out of its port.

Step 7

              Power Board               

• Remove the four 1.8 mm PH0 screws that are holding the board in.
• When you remove these screws, the plastic cups inside the PS Move stations will fall out.

Remove the four 1.8 mm PH0 screws that are holding the board in.

When you remove these screws, the plastic cups inside the PS Move stations will fall out.

Step 8

• Pick up the board.
• Pick the board straight up, or you risk damaging the charging ports.

Pick up the board.

Pick the board straight up, or you risk damaging the charging ports.

Step 9

• Using a plastic opening tool or a similar tool, gently pry the power ribbon cord out of its port.

Using a plastic opening tool or a similar tool, gently pry the power ribbon cord out of its port.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 3 other contributors 

                    Jacob                     

Member since: 03/11/2015

750 Reputation

                                      6 Guides authored                  



                       Badges:
                       13







                                                        +10 more badges                           

Team

                       Colorado Springs, Team 4-4, Panko Spring 2015                        

                                                  Member of Colorado Springs, Team 4-4, Panko Spring 2015 



                    UCCS-PANKO-S15S4G4                     


                                            3 Members                     


                                            6 Guides authored