Difficulty
Easy
Steps
4
Time Required
2 minutes
Sections
1
- Battery Box Reset
- 4 steps
Flags
2
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
Better Introduction
Improve this guide by completing or revising its introduction.
BackDreamer Autoshade
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Remove holding screws
- Remove the two Phillips plastic threading screws with a #1 Phillips head screwdriver.
Remove the two Phillips plastic threading screws with a #1 Phillips head screwdriver.
1024
Step 2
Disconnect battery pack connector
- Disconnect the battery pack connector.
Disconnect the battery pack connector.
Step 3
Reconnect the battery pack connector
- After a few seconds, reconnect the battery pack to the circuit board.
After a few seconds, reconnect the battery pack to the circuit board.
Step 4
Close and secure the battery box
- Hold the battery box together and insert one screw. Try tightening the screw. If the screw does not tighten, remove the screw and insert it again. The screw must be inserted straight to catch the threaded hole.
- Repeat the above step for the second screw.
Hold the battery box together and insert one screw. Try tightening the screw. If the screw does not tighten, remove the screw and insert it again. The screw must be inserted straight to catch the threaded hole.
Repeat the above step for the second screw.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 1 other contributor
David
Member since: 11/11/2020
734 Reputation
8 Guides authored
Badges:
5
+2 more badges